Conductive Grease 28g (new formulation) (recommended)

Technical Specifications

OEM cartridges have conductive grease at the end of the PCR roller metal shaft
and other electrical contact parts to improve the conductivity of these parts.

APPLICATION DIRECTIONS:
Apply approximately the same amount of grease as the OEM, because an excess of
grease doesn’t improve the conductivity. OEM conductive grease can get
contaminated with toner/paper dust after one cycle so it is necessary to remove
the old grease with alcohol and apply a new coating. This is especially
important for PCR contacts: (black side) magnetic roller contacts and drum
ground contacts (metal axle).