close
Error
Close

Mag roller coating solution for use in HP 4000, 4100, 2420, 2300, 2100, 4 oz (use Mag cleaning first)


Item No: 6845
:

 


Technical Specifications

FLAMMABLE MATERIAL!!!- CANNOT SHIP BY AIR

UNINET's MAG ROLLER COATING SOLUTION extends the life of the mag roller sleeve
by applying a coating of Teflon and sealants to the transfer layer of the mag
roller sleeves.

This coating fills in surface scratches and provides much-needed lubrication to
the sleeve, preventing wear, the main reason for mag roller sleeve failure. To
really work properly, we very much recommend that mag roller cleaning solution
be applied to the sleeve prior to the coating solution.

HOW TO APPLY:

FIRST, pre-clean the mag roller sleeve with CLEANING solution. The cleaning
solution should remove all toner and surface contaminants from the sleeve.

SHAKE WELL. Apply a few drops of mag coating solution to a cotton pad. It
must be a lint-free pad!

Apply mag coating solution in a back and forth circular motion along the axis
thin, even coat

Allow to dry for 2 to 3 minutes; a haze
of the mag roller sleeve. Go around the sleeve at least two times, applying a