Mag roller coating solution for use in HP 1300, 1200, 1150, 1100, 1010, AX, VX, 4 oz (limited inventory)

Item No: 8533


Technical Specifications


UNINET's MAG ROLLER COATING SOLUTION extends the life of the mag roller sleeve
by applying a coating of Teflon and sealants to the transfer layer of the mag
roller sleeves.

This coating fills in surface scratches and provides much-needed lubrication to
the sleeve, preventing wear, the main reason for mag roller sleeve failure. To
really work properly, we very much recommend that mag roller cleaning solution
be applied to the sleeve prior to the coating solution.


FIRST, pre-clean the mag roller sleeve with CLEANING solution. The cleaning
solution should remove all toner and surface contaminants from the sleeve.

SHAKE WELL. Apply a few drops of mag coating solution to a cotton pad. It
must be a lint-free pad!

Apply mag coating solution in a back and forth circular motion along the axis
of the mag roller sleeve. Go around the sleeve at least two times, applying a

thin, even coat
Allow to dry for 2 to 3 minutes; a haze